Alterations to a single dwelling and all other non-domestic work | Building Control fees | Sevenoaks District Council

Building Control fees

Alterations to a single dwelling and all other non-domestic work

Alterations

Limited to work not more than three storeys above ground level

Code

Alterations

Full Plans application fee

Full Plans inspection fee

Building Notice fee

Regularisation fee

D11

Renovation of a thermal element i.e. recovering a roof or recladding walls

£252

£252

£252

£315

D12

Replacement of windows, roof windows or external glazed doors

£252

£0

£252

£315

D14

Cost of work between £2,001 & £5,000

£355.50

£0

£355

£444

D15

Cost of work between £5,001 & £15,000

£210

£355

£565.50

£705

D16

Cost of work between £15,001 & £25,000

£238.50

£471

£709.50

£886.50

D17

Cost of work between £25,001 & £50,000

£378

£762

£1,138.50

£1,423.50

D18

Cost of work between £50,001 & £100,000

£469.50

£922.50

£1,392

£1,738.50

D21 Cost of work between £100,001 & £200,000 £580.50 £1,096.50 £1,677 £2,097

 

Competent Persons Schemes 

Code

Alterations

Full Plans application fee

Full Plans inspection fee

Building Notice fee

Regularisation fee

D19

Where a satisfactory competent Persons certificate will not be Issued, ie Part P, GASAFE, HETAS, OFTEC

£375

This charge relates to the first fix pre- plaster inspection and final testing on completion. For a Regularisation Certificate full testing and appraisal will be carried out.

Figures include VAT

Estimated cost of works

The estimated cost of work used to determine the charges above should be a reasonable estimate that would be charged by a professional builder to carry out such work (including VAT).

Competent Persons Schemes:

The Charges marked with an * have been reduced to reflect where controlled electrical and heating installations are be certified by an installer registered with one of the Governments Competent Persons Schemes. If a certified installer is not subsequently employed or Competent persons certification is not received, the charge in Table C, code D19, will be required for each unit. This is to enable checks and tests on the work to be made by our nominated contractor to establish that the work meets with the requirements of the Building Regulations 2010.